mil-c-24308 d-subminiature www.glenair.com e-mail: sales@glenair.com glenair, inc. ? 1211 air way ? glendale, ca 91201-2497 ? 818-247-6000 ? fax 818-500-9912 ? 2004 glenair, inc. printed in u.s.a. a-78 cage code 06324 557-180 d-subminiature solid tinel-lock tm banding backshell 557 t 180 m 3 b 06 a i tinel-locktm ring supplied (table ii - omit for none) dash no. (table iii) jackscrew style a = male socket head screw with clip b = male screw with clip h = hex head jackscrew with clip .30 (7.6) offset size 3, 4, 5 1.00 (25.4) .272 (6.9) typ a typ style t top entry shell sizes 3, 4, & 5 style t top entry shell sizes 1 & 2 style s side entry c typ b typ style e end entry 1.00 (25.4) raychem tinel-lock ring (optional) d typ f 4-40 thread typ style b jackscrew filister head connector shown for reference only .250 (6.3) typ. style a jackscrew socket head e typ product series cable entry style t = top s = side e = end basic part number finish symbol (page 3) shell size (table i)
mil-c-24308 d-subminiature www.glenair.com e-mail: sales@glenair.com glenair, inc. ? 1211 air way ? glendale, ca 91201-2497 ? 818-247-6000 ? fax 818-500-9912 ? 2004 glenair, inc. printed in u.s.a. a-79 cage code 06324 d dia .250 (6.4) .312 (7.9) .375 (9.5) .437 (11.1) .500 (12.7) e dia max .375 (9.5) .437 (11.1) .500 (12.7) .625 (15.9) .750 (19.1) 1. metric dimensions (mm) are indicated in parentheses. 2. do not use connectors with float mountings. 3. the tinel-lock tm ring designator must be specified according to the type of cable braid used. tinel-lock tm rings are marked with thermochromic paint which changes color when the correct installation temperature is reached. bi rings are identified with a red spot. ci rings are identified with a blue spot. dash no. 04 05 06 07 08* table iii: cable entry ring braid type desig. single layer 36 awg ai single layer 34 awg ai single layer 32 awg bi single layer 30 awg bi double layer 36 awg bi double layer 34 awg bi double layer 32 awg ci table ii: tinel-lock? ring tinel-lock tm ring option (see table ii) .070 (1.8) thermochromic paint (note 3) tinel-lock tm ring entry size 04 05 06 08 10 557-180 d-subminiature solid tinel-lock tm banding backshell * available in shell size 5 only. f dim 1.25 (31.8) 1.38 (35.1) 1.38 (35.1) 1.50 (38.1) 1.50 (38.1) com?l shell size ref e/09 a/15 b/25 c/37 d/50 shell size 1 2 3 4 5 table i: shell size and connector interface dimensions a 1.20 (30.6) 1.53 (38.9) 2.08 (52.8) 2.72 (69.0) 2.63 (66.7) b .500 (12.7) .500 (12.7) .500 (12.7) .500 (12.7) .609 (15.5) c .005 (.1) .984 (25.0) 1.312 (33.3) 1.852 (47.0) 2.500 (63.5) 2.406 (61.1)
|
